WALKER AIRSEP Air Filters Field Service Kit For 12″ CCE AirSep

Field Service Kit for all Walker Engineering CCE AirSep Equipped Caterpillar C30 and C32 marine diesel engines.

Take your diesel engine to the next level with high efficiency CCV filtration. Walker Engineering introduces new field service kits for 12″ diameter CCE AIRSEPS ® or for AIRSEPS factory-installed on Caterpillar ® C30 and Caterpillar ® C32 marine engines.This kit will restore your CCE AIRSEP to like-new performance, and it’s ideal for seasonal service schedules. 

Order one (1) Field Service Kit per engine. 

Includes all parts required for complete servicing of two 12″ CCE AIRSEPS:

• First-stage oil mist filters (2 sizes, 2 each)
• Primary stage oil mist filters (2)
• (2) sets of O-ring seals

• Large air filter cleaning kit
• Service instructions                                                                                                

Note: The newer CCE AIRSEPS have high-efficiency disposable elements used inside the AIRSEP that capture the fine oil mist found in engine crankcase emissions. These parts cannot be cleaned, so they must be periodically replaced in sets (both pieces) and pairs (both AirSeps). The 1st stage oil mist filters must be replaced at the same time as the primary oil mist filters, along with the o-rings to properly seal the AirSep canister. 

To see if your AIRSEP is the CCE system:

Check to see if it uses springs to attach the air filter. If it does NOT use springs, it is a CCE AIRSEP with a V-band attachment clamp, and it has the disposable elements inside.

Contact Walker Engineerings Technical Staff to answer your questions.